Florence, SC Fire Hydrant Replacement, Repair & Services

A: When it comes to fire safety, fire hydrant maintenance is often overlooked. Fire hydrants need to be tested regularly to make sure that there is a functioning water source with the right amount of water pressure for firefighters to use in case of an emergency. To ensure that you are kept safe in the event of a fire, you should have your hydrant tested once every 5 years and inspected annually.

Hydrant Mechanics offers yearly maintenance services so you can rest assured that you and your surroundings are kept safe in the event of an emergency. Call us for more information on our services or to get on our maintenance schedule today!

A: Fire hydrants are built to last and can last up to 100 years if properly taken care of. Some things that can shorten the life of your fire hydrant include severe weather conditions, lack of maintenance, damage and vandalism. Therefore, it’s important to take good care of your fire hydrant so you can have peace of mind that it will work effectively in the event of an emergency.

Hydrant Mechanics can help your fire hydrant last for longer through our preventative maintenance service. Call us to learn more today!

A: You can find fire hydrant installation services from fire safety companies near you. If you’re not sure where to start, call your town hall or local fire department for recommendations. Because of the importance of fire safety, you should always make sure that whoever you hire to install a hydrant is professional, certified and follows the code set up by the local municipality and fire marshal.

Hydrant Mechanics offers certified and professional services from trained and expert technicians. If you need reliable fire hydrant installation, call us to see how we can help you today!

Having a fire hydrant replaced typically costs between $3,000-$7,000 in Florence, SC. However, fire hydrant replacement service costs can be influenced by factors such as the distance between the hydrant and the city utilities, the complexity of the replacement and the labor costs.

Hydrant Mechanics offers expert fire hydrant replacement services in Florence, SC. To get your fire hydrant replaced, call us today!

Hydrants should be examined at least once a year on a regular basis. Dry-barrel fire hydrants may need two inspections each year, one in the spring and one in the fall.

An example of a proper fire hydrant maintenance examination is provided below:

• Remove one nozzle/pumper cap and listen for main valve leaking using a listening device. 
• Check the barrel for water or ice with a plumb-bob. 
• Pump water out of the hydrant barrel, wait a few minutes, and then test with the plumb-bob to ensure that no water is going through the hydrant lead's valve. 
• Replace the nozzle/pumper cap, giving enough room for air to escape. Allow air to vent from the loose cap by turning the hydrant a few turns, then tighten the cap.
• Check for leaks around the flanges, nozzles/pumpers, seals, and operating nut with the hydrant fully pressured.
• Flush for 10 to 15 seconds after partially closing the hydrant to unblock the drain ports.
• Close the hydrant completely, then open it a quarter- to half-turn to alleviate strain on the thrust bearing or packing.
• Remove a nozzle/pumper cap and, if necessary, add a diffuser and a hand valve for control. To eliminate foreign material, flush the hydrant.
• Remove the diffuser and close the hydrant. Check for suction as the water drains from the barrel by placing your palm over the nozzle/pumper.
• Notify utility and fire department employees as soon as possible if a hydrant becomes dysfunctional and requires repair or replacement.